#SWITCH CONTROL MAC PASSWORD#
#SWITCH CONTROL MAC SERIES#
#SWITCH CONTROL MAC MAC#

RADIUS server for authentication of the MAC address of the end device. The switch does not attempt to authenticate the end device throughĨ02.1X authentication but instead immediately sends a request to the Switch to determine that the end device is not 802.1X-enabled by configuring On that interface, you can eliminate the delay that occurs for the If you know that only non-responsive supplicants connect To authenticate the end device by using 802.1X, and if that methodįails, it attempts to authenticate the end device by using MAC RADIUSĪuthentication. You can configure both 802.1X and MAC RADIUS authentication If the MAC address matches an address in the list, the end device To match the MAC address with a list of MAC addresses in its database. Of the device to the authentication server. Is detected on the interface, the switch transmits the MAC address When an end device that is not 802.1X-enabled To network devices that do not support 802.1X and for which you want You canĬonfigure MAC RADIUS authentication on interfaces that are connected Printers and IP phones do not support the 802.1X protocol. Is 802.1X-enabled, but many single-purpose network devices such as The 802.1X authentication method only works if the end device For more information about RTGs, see Understanding Redundant Trunk Links (Legacy RTG Configuration). You cannot configure 802.1X authentication on redundant trunk If the credentialsįorwarded by the authenticator match the credentials in the authentication Supplied by the end device to the authentication server. It contains credential information for each end device that is authenticated

Server contains the backend database that makes authentication decisions. The switch is the authenticator,Īnd it controls access by blocking all traffic to and from end devices It can be authenticated through MAC RADIUS authentication. VLAN is an IP phone, voice traffic is dropped.Ī nonresponsive end device is one that is not 802.1X-enabled.

If the end device that is authenticated using the server-reject

#SWITCH CONTROL MAC SERIES#

See Example: Configuring Fallback Options on EX Series Switches for EAP-TTLS Authentication and Odyssey Access Clients for additional information. Typically only to the Internet, for these devices. A server-reject VLAN can provide a remedial connection, You can configure a server-reject VLAN to provide limited LANĪccess for responsive 802.1X-enabled end devices that sent incorrectĬredentials.

#SWITCH CONTROL MAC PASSWORD#

The credentials required depend on the version of EAP being used-specifically,Ī username and password for EAP MD5 or a username and client certificatesįor Extensible Authentication Protocol-Transport Layer Security (EAP-TLS),ĮAP-Tunneled Transport Layer Security (EAP-TTLS), and Protected EAP A responsive endĭevice is 802.1X-enabled and provides authentication credentials usingĮAP. The end device can be responsive or nonresponsive. Is the IEEE term for an end device that requests to join the network. Supplicant (also called end device)-Supplicant Request packet is retransmitted and the timeout period between attempts.įor information, see Configuring 802.1X Interface Settings (CLI Procedure).Īn 802.1X authentication configuration for a LAN contains three You can configure both the maximum number of times an EAPoL Traffic and HTTP traffic, is blocked at the data link layer. While 802.1X authentication is in process, only 802.1X traffic andĬontrol traffic can transit the network.

Message exchanges between the end device and the authentication server. Protocol between the authentication server and the switch is RADIUS.ĭuring the authentication process, the switch completes multiple Version of EAP designed to work with Ethernet networks. Is Extensible Authentication Protocol over LAN (EAPoL). The communication protocol between the end device and the switch Switch is based upon the IEEE 802.1X standard Port-Based The 802.1X authentication feature on an EX Series It provides an authentication mechanism for devices seeking Interfaces ge-0/0/19 and ge-0/0/20 are connectedĨ02.1X is an IEEE standard for port-based network access control To IP phones with an integrated hub to connect the phone and desktop Interfaces ge-0/0/9 and ge-0/0/2 are connected Interface ge-0/0/8 is connected to fourĭesktop PCs through a hub. The authentication server on port ge-0/0/10. The topology contains an EX Series access switch connected to

Switch control mac